Name: Plan 23690JD: Tri-Level Northwest House Plan
SKU: 23690JD
Price: 2700.0 USD
Availability: InStock

VIEW ALL

Plan 23690JD

Tri-Level Northwest House Plan

Heated S.F.

4,736

Beds

5

Baths

6

Stories

2

Cars

3

Floor Plan

Main Floor

Upper Floor

Lower Floor

Plan Details

From the front, this striking Northwest house plan appears to be two-story but there's a finished lower level that gives you three floors of luxurious living space.
Step into the wide foyer through double doors, where you can see the gently curved staircase.
There's plenty of room for big holiday gatherings in the formal dining room with its lovely coffered ceiling.
The home comes with both a walk-in food pantry and a butler's pantry.
Built-ins flank the great room fireplace and two sets of sliding glass doors lead out to the rear covered deck.
On the upper floor, four big bedrooms are served by the second floor laundry room.
Homeowners get a private deck off the master suite.
The fifth bedroom lies on the finished lower level, along with a rec room, wine cellar and plenty of storage.
NOTE: Additional fees apply when building in the State of Washington. Contact us for more information.

What's Included

Cover Sheet - The cover sheet includes the general notes and building code information, design standards and structural materials specifications required to construct your home.
Schedule Sheet - The schedule sheet includes the roof and foundation ventilation schedules, insulation and vapor barrier specifications, and exhaust fan ventilation schedule.
Detail Sheet - The detail sheet shows building components at large scale as required to explain construction of footings, foundation walls, concrete slabs, framed floors and walls, posts, beams, insulation, eaves, roofs, vents, stairs, skylights, and connections.
Foundation Plan Sheet - The foundation plan sheet shows the layout of the crawl space, walk-out basement or slab foundation. The foundation plan includes all necessary notes, dimensions, concrete walls, footing pads, posts, beams, bearing walls, crawlspace vents, footing schedule, steel reinforcing, and structural information. If you require a different foundation type, please contact us for modifications to your plan.
Floor Plan Sheet - Floor plans are horizontal cuts through each floor level of the home, usually at 5' above the floor. The floor plan shows the location of interior and exterior walls, doors, windows, stairs, closets, cabinets, flooring, appliances, plumbing fixtures, fireplaces, posts and beams. Floor plans also indicate vaulted, coffered, or box beam ceilings, cased openings and areas with ceiling soffits.
Roof Framing Plan Sheet - The roof framing plan shows the geometry of the hips, ridges, valleys, dormers, roof pitches, wall and plate heights, and overhangs. The plan also shows all individual roof framing members, trusses, rafters, beams, skylights, roof vents, gutters, downspouts, skylights, bearing walls under framing members, and point loads.
Elevation Sheet - Exterior elevations show all four sides of the house, describing the roofing, siding, and trim materials, doors, windows, roof pitches, skylights, gutters, chimneys, wall heights, finish grade and overall building height.
Building Section Sheet - Building sections are vertical cuts through the house from the roof to the foundation. The sections illustrate the construction sequence from bottom to top starting with excavation, proceeding up through the foundation, drainage, wall and floor framing, stair framing, roof framing, windows, doors, venting, and exterior and interior finishes. Wall plate heights for each floor are also delineated.

What's Not Included

Electrical Plan - handled by your subcontractor to match your individual needs
Architectural or Engineering Stamp - handled locally if required
Site Plan - handled locally when required
Mechanical Drawings (location of heating and air equipment and duct work) - your subcontractors handle this
Plumbing Drawings (drawings showing the actual plumbing pipe sizes and locations) - your subcontractors handle this
Energy calculations - handled locally when required

PRINT DETAILS

Square Footage Breakdown

Total Heated Area:

4,736 sq. ft.

Lower Level:

1,092 sq. ft.

1st Floor:

1,928 sq. ft.

2nd Floor:

1,716 sq. ft.

Porch, Front:

182 sq. ft.

Deck:

222 sq. ft.

Beds/Baths

Bedrooms:

5

Full bathrooms:

6

Foundation Type

Standard Foundations:

Walkout

Need A Different Foundation?

Request A Modification Quote

Exterior Walls

Standard Type(s):

2x6

Dimensions

Width:

44' 0"

Depth:

66' 0"

Max Ridge Height:

20' 6"

Garage

Type:

Drive Under

Area:

836 sq. ft.

Count:

3 Cars

Entry Location:

Rear

Ceiling Heights

Lower Level

10'

First Floor

9'

Second Floor

8'

Roof Details

Primary Pitch:

1 on 12

Framing Type:

Stick

Architectural Style

Contemporary

Northwest

Special Features

Butler Walk-in Pantry

Formal Dining

Game/Rec Room

Laundry - Upstairs

Master Suite - 2nd Floor

Plan Collections

* Please note that all sale prices and promotions featured on our website are subject to change without prior notice. While we strive to provide accurate and up-to-date information, occasional discrepancies may occur due to factors beyond our control. We encourage you to verify all details, including pricing and availability, before making any purchase. Exclusions or restrictions may apply to specific promotions. We reserve the right to modify or cancel any sale at our discretion. Thank you for your understanding and happy shopping! Let's go back to the top.