Arched windows, elaborate roof lines and a wealth of luxurious amenities combine to give you an outstanding Mediterranean house plan.
A half wall between the foyer and the formal dining room keeps the views going as soon as you step through the front door.
You can see straight back through the enormous living room out to the covered lanai behind.
Stunning ceiling treatments can be found in almost every room, even the master bathroom.
The wet bar is perfectly positioned to serve the informal family living area and the main formal rooms.
Have breakfast in the delightful circular nook with its tray ceiling and glass wall.
From here you can see the huge family room that also has a tray ceiling and the spacious kitchen.
Double doors on the other side of the home open to reveal the opulent master suite that has a built-in display niche for your collectibles, two large walk-in closets and a huge bathroom where the tub is framed by columns.
An outdoor fireplace warms the covered lania area and you get an outdoor summer kitchen too.
Take the gorgeous fanned staircase or the residential elevator up to the second floor where there's a huge loft with wet bar and a door to the second floor sun deck.
Bedroom 3 gets a private balcony and bedroom 4 has sliding glass doors to the sun deck.
NOTE: This house plan is not for sale for use in Collier and Lee Counties, Florida without the prior written consent from the designer. Pricing will vary if permission is granted. Please contact us for more information.
What's Included
Elevations - Drawn at 1/8″ to 1/4″ = 1′-0″ Scale, and Includes:
Material Labels
Floor-to-Floor Heights
Roof Slope Indicators
Floor Plans - Drawn at 1/8″ to 1/4″ = 1′-0″ Scale, and Includes:
Door and Window Sizes
Completely Dimensioned Floor Plan
Room Labels and Interior Room Sizes
Electrical Layouts
Building Section Markers
All Electrical Outlets, Fixtures, and Switching
Foundation Plan - Drawn at 1/8″ to 1/4″ = 1′-0″ Scale, and Includes:
Floor and Deck Joist Size and Spacing
Electrical Locations (if applicable)
Roof Design Plan - Drawn at 1/8″ to 1/4″ = 1′-0″scale, and Includes:
All Beam and Header Heights and Locations
All Hips, Gables, Ridges, and Valleys
Building Section Markers
Building Sections - Drawn at 1/8″ to 1/4″ = 1′-0″ Scale, and Includes:
Floor Joist Size and Spacing
Floor-to-Floor Heights
Non-Typical Plate Heights Indicated
Typical Wall Sections - Drawn at 1/8″ to 1/2″ = 1′-0″ Scale, and Includes:
All Labels Indicating Wall Construction
Foundation Wall Thickness and Reinforcing
Insulation Type and Thickness
Miscellaneous Notes and Details
Miscellaneous General Notes
Stairway details (if applicable)
We do provide a slab plan, however, the structural foundation plan is to be provided by the structural engineer selected by your builder or yourself. This is done because our slab plan cannot anticipate the variations in soil, footings and other conditions per your specific site. We provide the design of the roof as well, however, the truss layouts need to be provided by a truss engineer or your lumber company. Your builder can provide these contacts for you. Please keep in mind that these are additional expenses outside of the cost of the original plan that you purchase from us.
What's Not Included
Architectural or Engineering Stamp - handled locally if required
Site Plan - handled locally when required
Mechanical Drawings (location of heating and air equipment and duct work) - your subcontractors handle this
Plumbing Drawings (drawings showing the actual plumbing pipe sizes and locations) - your subcontractors handle this
Energy calculations - handled locally when required
*
Please note that all sale prices and promotions featured on our website are subject to change without prior notice. While we strive to provide accurate and up-to-date information, occasional discrepancies may occur due to factors beyond our control. We encourage you to verify all details, including pricing and availability, before making any purchase. Exclusions or restrictions may apply to specific promotions. We reserve the right to modify or cancel any sale at our discretion. Thank you for your understanding and happy shopping!
Let's go back to the top.
Not all items qualify for discounts. Discounts are only applied to plans, not to Cost-to-Build Reports, plan options and optional foundations and some of our designers don't allow us to discount their plans.
×
Please note the following
Your Materials List will match the base plan only. The following options will not be reflected on the materials list:
Spacious Mediterranean House Plan with Wet Bars on Both Floors - 4669 Sq Ft
4,669
Heated s.f.
4
Beds
5.5
Baths
2
Floors
3
Car garage
Floor Plan
Main Level
2nd Floor
Plan Details
Square Footage Breakdown
Total:
4,669 sq. ft.
1st Floor:3,142 sq. ft.
2nd Floor:1,527 sq. ft.
Dimensions
Width:101' 6"
Depth:58' 4"
Max ridge height:30' 0"
Beds/Baths
Bedrooms:
4
Full bathrooms:5
Half bathrooms:1
Garage
Type:Attached
Area:848 sq. ft.
Count:3 Cars
Entry Location:Side
Foundation Type
Standard Foundations:Slab
Exterior Walls
Standard Type(s):Block / CMU (main floor)
Optional Type(s):2x6
Ceiling Heights
Floor / Height:
First Floor /
10' 0"
Second Floor /
9' 0"
Are you sure you want to remove this plan from your favorites?
It will be removed from all of your collections.
Price Match Guarantee
If you've found a better price, call us at 1-800-854-7852 or email us at [email protected] with the plan number, price, and where you found it for less. We will match that price and give you an additional 10% discount.
*Our Price Guarantee is limited to house plan purchases within 10 business days of your original purchase date.
×
Block / CMU (main floor)
Most concrete block (CMU) homes have 2 x 4 or 2 x 6 exterior walls on the 2nd story.