Name: Plan 23769JD: Rustic 4-Bed Mountain Craftsman Home Plan with Den and Bonus Room
SKU: 23769JD
Price: 2000.0 USD
Availability: InStock

VIEW ALL

Plan 23769JD

Rustic 4-Bed Mountain Craftsman Home Plan with Den and Bonus Room

Heated S.F.

3,212

Beds

4

Baths

3

Stories

2

Cars

3

Floor Plan

Main Level

2nd Floor

Plan Details

Rustic, gabled roofs, shake siding, and board and batten siding all contribute to the exquisite exterior of this 4-bedroom, mountain craftsman house plan.
The vaulted ceiling on the front porch continues through the foyer giving a feeling of grandeur upon entering. To the right, sits a quiet den with french doors leading to an outdoor, covered space. To the left of the foyer, discover a guest bedroom.
Due to the open-concept, floor plan, the great room's fireplace serves as a focal point throughout the main living space, and a wall of windows provides ample natural light.
An oversized island in the kitchen offers seating for three, and a walk-in pantry is just what the cook ordered. Through sliding doors in the dining room, uncover a BBQ porch with a vaulted ceiling.
Upstairs, retreat to your master bedroom with a vaulted ceiling, featuring a 5-fixture bathroom and a large, walk-in closet. Two additional bedrooms reside on the second level, along with an upstairs laundry room for added convenience.
A bonus room above the 3-car garage provides ample space to spread out (note, the bonus room is factored into the total living area figure).
NOTE: Additional fees apply when building in the State of Washington. Contact us for more information.

What's Included

Cover Sheet - The cover sheet includes the general notes and building code information, design standards and structural materials specifications required to construct your home.
Schedule Sheet - The schedule sheet includes the roof and foundation ventilation schedules, insulation and vapor barrier specifications, and exhaust fan ventilation schedule.
Detail Sheet - The detail sheet shows building components at large scale as required to explain construction of footings, foundation walls, concrete slabs, framed floors and walls, posts, beams, insulation, eaves, roofs, vents, stairs, skylights, and connections.
Foundation Plan Sheet - The foundation plan sheet shows the layout of the crawl space, walk-out basement or slab foundation. The foundation plan includes all necessary notes, dimensions, concrete walls, footing pads, posts, beams, bearing walls, crawlspace vents, footing schedule, steel reinforcing, and structural information. If you require a different foundation type, please contact us for modifications to your plan.
Floor Plan Sheet - Floor plans are horizontal cuts through each floor level of the home, usually at 5' above the floor. The floor plan shows the location of interior and exterior walls, doors, windows, stairs, closets, cabinets, flooring, appliances, plumbing fixtures, fireplaces, posts and beams. Floor plans also indicate vaulted, coffered, or box beam ceilings, cased openings and areas with ceiling soffits.
Roof Framing Plan Sheet - The roof framing plan shows the geometry of the hips, ridges, valleys, dormers, roof pitches, wall and plate heights, and overhangs. The plan also shows all individual roof framing members, trusses, rafters, beams, skylights, roof vents, gutters, downspouts, skylights, bearing walls under framing members, and point loads.
Elevation Sheet - Exterior elevations show all four sides of the house, describing the roofing, siding, and trim materials, doors, windows, roof pitches, skylights, gutters, chimneys, wall heights, finish grade and overall building height.
Building Section Sheet - Building sections are vertical cuts through the house from the roof to the foundation. The sections illustrate the construction sequence from bottom to top starting with excavation, proceeding up through the foundation, drainage, wall and floor framing, stair framing, roof framing, windows, doors, venting, and exterior and interior finishes. Wall plate heights for each floor are also delineated.

What's Not Included

Electrical Plan - handled by your subcontractor to match your individual needs
Architectural or Engineering Stamp - handled locally if required
Site Plan - handled locally when required
Mechanical Drawings (location of heating and air equipment and duct work) - your subcontractors handle this
Plumbing Drawings (drawings showing the actual plumbing pipe sizes and locations) - your subcontractors handle this
Energy calculations - handled locally when required

PRINT DETAILS

Square Footage Breakdown

Total Heated Area:

3,212 sq. ft.

1st Floor:

1,720 sq. ft.

2nd Floor:

1,492 sq. ft.

Beds/Baths

Bedrooms:

4

Full bathrooms:

3

Foundation Type

Standard Foundations:

Crawl

Need A Different Foundation?

Request A Modification Quote

Exterior Walls

Standard Type(s):

2x6

Dimensions

Width:

60' 0"

Depth:

58' 6"

Max Ridge Height:

30' 0"

Garage

Type:

Attached

Area:

676 sq. ft.

Count:

3 Cars

Entry Location:

Front

Ceiling Heights

First Floor

10'

Second Floor

8'

Roof Details

Primary Pitch:

8 on 12

Secondary Pitch:

4 on 12

Framing Type:

Stick And Truss

Architectural Style

Special Features

Butler Walk-in Pantry

Den

Laundry - Upstairs

Master Suite - 2nd Floor

* Please note that all sale prices and promotions featured on our website are subject to change without prior notice. While we strive to provide accurate and up-to-date information, occasional discrepancies may occur due to factors beyond our control. We encourage you to verify all details, including pricing and availability, before making any purchase. Exclusions or restrictions may apply to specific promotions. We reserve the right to modify or cancel any sale at our discretion. Thank you for your understanding and happy shopping! Let's go back to the top.