Name: Plan 23558JD: 5 Bed Craftsman With Rec Room
SKU: 23558JD
Price: 1800.0 USD
Availability: InStock

VIEW ALL

Plan 23558JD

5 Bed Craftsman With Rec Room

Heated S.F.

2,727

Beds

3-5

Baths

4

Stories

2

Cars

2

Floor Plan

Main Level

Lower Level

2nd Floor

Plan Details

Columns are all that separate the living room from the dining room and kitchen in this Craftsman home plan. The open layout lets you see from room to room with no walls to block views.
Use the den as the fourth bedroom since it has a nearby bathroom and a linear closet.
The covered barbecue porch in back has room for table and chairs for dining outside.
Located towards the front of the house, the vaulted master suite gives you two walk-in closets and a large bathroom with dual sinks.
Add a second floor utility room and two more bedrooms and you have a terrific Craftsman home plan.
Best of all a finished lower level gives you a rec room and fifth bedroom.
The roof is a truss designs with a main pitch of 6:12 and a secondary pitch of 4:12.
Related Plan: Eliminate the lower level with house plan 23557JD (2,633 sq. ft.).
NOTE: Additional fees apply when building in the State of Washington. Contact us for more information.

What's Included

Cover Sheet - The cover sheet includes the general notes and building code information, design standards and structural materials specifications required to construct your home.
Schedule Sheet - The schedule sheet includes the roof and foundation ventilation schedules, insulation and vapor barrier specifications, and exhaust fan ventilation schedule.
Detail Sheet - The detail sheet shows building components at large scale as required to explain construction of footings, foundation walls, concrete slabs, framed floors and walls, posts, beams, insulation, eaves, roofs, vents, stairs, skylights, and connections.
Foundation Plan Sheet - The foundation plan sheet shows the layout of the crawl space, walk-out basement or slab foundation. The foundation plan includes all necessary notes, dimensions, concrete walls, footing pads, posts, beams, bearing walls, crawlspace vents, footing schedule, steel reinforcing, and structural information. If you require a different foundation type, please contact us for modifications to your plan.
Floor Plan Sheet - Floor plans are horizontal cuts through each floor level of the home, usually at 5' above the floor. The floor plan shows the location of interior and exterior walls, doors, windows, stairs, closets, cabinets, flooring, appliances, plumbing fixtures, fireplaces, posts and beams. Floor plans also indicate vaulted, coffered, or box beam ceilings, cased openings and areas with ceiling soffits.
Roof Framing Plan Sheet - The roof framing plan shows the geometry of the hips, ridges, valleys, dormers, roof pitches, wall and plate heights, and overhangs. The plan also shows all individual roof framing members, trusses, rafters, beams, skylights, roof vents, gutters, downspouts, skylights, bearing walls under framing members, and point loads.
Elevation Sheet - Exterior elevations show all four sides of the house, describing the roofing, siding, and trim materials, doors, windows, roof pitches, skylights, gutters, chimneys, wall heights, finish grade and overall building height.
Building Section Sheet - Building sections are vertical cuts through the house from the roof to the foundation. The sections illustrate the construction sequence from bottom to top starting with excavation, proceeding up through the foundation, drainage, wall and floor framing, stair framing, roof framing, windows, doors, venting, and exterior and interior finishes. Wall plate heights for each floor are also delineated.

What's Not Included

Electrical Plan - handled by your subcontractor to match your individual needs
Architectural or Engineering Stamp - handled locally if required
Site Plan - handled locally when required
Mechanical Drawings (location of heating and air equipment and duct work) - your subcontractors handle this
Plumbing Drawings (drawings showing the actual plumbing pipe sizes and locations) - your subcontractors handle this
Energy calculations - handled locally when required

PRINT DETAILS

Square Footage Breakdown

Total Heated Area:

2,727 sq. ft.

Lower Level:

607 sq. ft.

1st Floor:

1,035 sq. ft.

2nd Floor:

1,085 sq. ft.

Beds/Baths

Bedrooms:

3, 4, or 5

Full bathrooms:

4

Foundation Type

Standard Foundations:

Daylight

Need A Different Foundation?

Request A Modification Quote

Exterior Walls

Standard Type(s):

2x6

Dimensions

Width:

44' 0"

Depth:

47' 0"

Max Ridge Height:

27' 6"

Garage

Type:

Attached

Area:

390 sq. ft.

Count:

2 Cars

Entry Location:

Front

Ceiling Heights

Lower Level

9'

First Floor

10'

Second Floor

9'

Roof Details

Primary Pitch:

6 on 12

Secondary Pitch:

4 on 12

Framing Type:

Truss

Architectural Style

Special Features

Master Suite - 2nd Floor

Plan Collections

Photo Gallery

Sloping Lot

* Please note that all sale prices and promotions featured on our website are subject to change without prior notice. While we strive to provide accurate and up-to-date information, occasional discrepancies may occur due to factors beyond our control. We encourage you to verify all details, including pricing and availability, before making any purchase. Exclusions or restrictions may apply to specific promotions. We reserve the right to modify or cancel any sale at our discretion. Thank you for your understanding and happy shopping! Let's go back to the top.