This 4-bed house plan has a dynamic facade with great roof lines. Painted or washed brick, shakes, and board-and-batten siding are the chosen exterior materials which allow for many diverse color palates. Timber lintels, gable brackets and slatted shutters complete the façade. The unique footprint is purposefully designed so that the home may be placed on different sites such as cul-de-sac or corner lots while maintaining the side entry garage.
Inside, the grand island kitchen anchors the living areas opening on to a family room with a cozy fireplace and built-in cabinetry and a large dining room. A 3-season screened porch as well as a covered porch add outdoor living spaces.
The master suite is located to give you ultimate privacy and includes a spa bath and large walk-in closet. A guest suite with a private bath rounds out the lower level. This flexible space could double as an office for the telecommuter.
The upper level holds two additional bedroom suites and a multi-purpose bonus space.
What's Included
Elevations - at 1/4" or 3/16" and the side and rear elevations at 1/8" scale. The elevations show and note the exterior finished materials of the house.
Foundation - every plan is available with a walkout style basement (three masonry walls and one wood framed rear wall with windows and doors). The basement plans are a 1/4" or 3/16" scale layout of unfinished spaces showing only the necessary 2 x 6 wood framed load bearing walls. These plans are completed with dimensions, door/window sizes. Crawlspace and/or slab on grade foundations are available for some plans.
Floor plan - each plan consists of 1/4" or 3/16" scale layouts showing the location of 2 x 4 walls, doors, windows, plumbing fixtures, cabinetry, stairs and decorative ceilings. These plans are complete with dimensions, notes, door/window sizes and a schematic electrical layout.
Building sections - Take vertical cuts throughout the house and the stairs showing floor, ceiling and roof height information.
Floor framing - if included it shows each floor joist indicating the size, spacing and length. All beams are sized and labeled. Each framing plan sheet includes any framing details that are needed (tray details, connections details, etc. All framing is designed using conventional 2 x 10 floor joist or wood I-joist, depending on the span conditions of each home. FRAMING PLANS ARENOT AVAILABLE for all home so please follow up with us for availability.
Ceiling framing - if included, it shows each ceiling joist indicating the size, spacing and length. All beams are sized and labeled. All of the joists are counted and coordinated with the material list. FRAMING PLANS ARENOT AVAILABLE for all home so please follow up with us for availability.
Roof framing - if included, shows each rafter, valley, hip and ridge indicating size, spacing and length. All beams are sized and labeled. All of the joists are counted and coordinated with the material list. FRAMING PLANS ARENOT AVAILABLE for all home so please follow up with us for availability.
Details sheets - shows foundation details, typical wall section and other framing details. Also included are miscellaneous interior trim and fireplace details that can be used to customize the home.
What's Not Included
Architectural or Engineering Stamp
Site Plan
Mechanical Drawings (location of heating and air equipment and duct work)
Plumbing Drawings (drawings showing the actual plumbing pipe sizes and locations)
*
Please note that all sale prices and promotions featured on our website are subject to change without prior notice. While we strive to provide accurate and up-to-date information, occasional discrepancies may occur due to factors beyond our control. We encourage you to verify all details, including pricing and availability, before making any purchase. Exclusions or restrictions may apply to specific promotions. We reserve the right to modify or cancel any sale at our discretion. Thank you for your understanding and happy shopping!
Let's go back to the top.
Not all items qualify for discounts. Discounts are only applied to plans, not to Cost-to-Build Reports, plan options and optional foundations and some of our designers don't allow us to discount their plans.
×
Please note the following
Your Materials List will match the base plan only. The following options will not be reflected on the materials list:
4-Bed House Plan with Dynamic Facade
3,080
Heated s.f.
4
Beds
4
Baths
2
Floors
3
Car garage
Floor Plan
Main Level
2nd Floor
Plan Details
Square Footage Breakdown
Total:
3,080 sq. ft.
1st Floor:2,276 sq. ft.
2nd Floor:804 sq. ft.
Dimensions
Width:62' 6"
Depth:73' 0"
Max ridge height:31' 8"
Beds/Baths
Bedrooms:
4
Full bathrooms:4
Garage
Type:Attached
Area:773 sq. ft.
Count:3 Cars
Entry Location:Side, Front
Foundation Type
Standard Foundations:Slab, Crawl, Walkout
Exterior Walls
Standard Type(s):2x4
Ceiling Heights
Floor / Height:
First Floor /
10' 0"
Second Floor /
9' 0"
Are you sure you want to remove this plan from your favorites?
It will be removed from all of your collections.
Price Match Guarantee
If you've found a better price, call us at 1-800-854-7852 or email us at [email protected] with the plan number, price, and where you found it for less. We will match that price and give you an additional 10% discount.
*Our Price Guarantee is limited to house plan purchases within 10 business days of your original purchase date.
×
Block / CMU (main floor)
Most concrete block (CMU) homes have 2 x 4 or 2 x 6 exterior walls on the 2nd story.